Male 4mm ESC Connector
Male 4mm ESC Connector ESC Connector Specification
The ESC (Electronic Speed Controller) connector is commonly used in RC (remote control) vehicles and drones to control the motor’s speed.
To use an ESC connector, follow these general steps:
1. Power Source:
Connect the power source, usually a LiPo battery, to the ESC.
Make sure to match the polarity (positive and negative) correctly.
2. Motor Connection:
Connect the motor to the ESC.
There are typically three wires, usually color-coded, that need to be connected.
The order may vary depending on the motor and ESC, so refer to the manufacturer’s instructions.
3. Receiver Connection:
Plug the ESC into the throttle channel of your RC receiver.
This channel is usually labeled “TH” or “CH2”. Ensure proper alignment and secure connection.
4. Calibration:
Before operating, calibrate the ESC by following the manufacturer’s instructions.
This step usually involves initializing the ESC to understand the throttle range of your transmitter.
5. Control:
Turn on your transmitter and then the ESC.
Gradually increase the throttle to test the motor’s response.
Make sure the motor spins in the correct direction.
If not, you might need to swap any two of the motor wires.
6. Programming:
Some ESCs offer programming options for features like brake strength, timing, and cutoff voltage.
Consult the manual for your specific ESC model if you want to adjust these settings.
7. Operation:
Once everything is set up and calibrated, you can control the motor’s speed using your transmitter’s throttle stick.
Remember, specific instructions might vary based on the brand and model of your ESC and RC equipment, so always refer to the user manual provided with your equipment.
Safety precautions, such as proper ventilation and monitoring battery levels, are also essential during operation.
[contact-form][contact-field label=”Name” type=”name” required=”true” /][contact-field label=”Email” type=”email” required=”true” /][contact-field label=”Website” type=”url” /][contact-field label=”Message” type=”textarea” /][/contact-form]
Download the specification sheet
Reviews
There are no reviews yet.